Frequently Asked Questions About Wood Gates

The choice of wood gates presents some challenges that a person has to take into consideration. It needs to be tall enough to be visible from the front, so to create an interesting design focal point, leading the eye and causing the observer to think that must be a really cool back yard if it has a gate like that!”. You can use corner braces (arbor gate) but you don’t have to (other two gates). A massive sliding wooden gate is one manner to control access to your property through walkways or how to build a gate with wheels how to cling sliding fence gates.

Another simple trick in limiting wood warp is to install new wood as soon as it arrives on the job site. From what I can see in your photos I think you could get by with a double gate without the bogey wheels. Double or Single Swing: Whether a wood entry gate has one or two halves (or leaves) is generally determined by the width of the opening. High-tensile steel fences allow long stretches of fence to be constructed between two strong corner or brace post assemblies. Using the existing fence as a guide, measure the distance from the top of the fence paling, to the top rail.

This should be 2 to 2.5 times as long as the height of the fence in order to achieve the proper angle for the diagonal brace wire. Our old wooden fence and gates were warped and rotted when we got this place and after we replaced the fence, it was time to start looking for two new gates. Most people will agree that touching an electric fence is a very unpleasant experience.

You’ll probably be required to submit a fence plan with the completed application. How much you need depends on he spread rate of each product and the type and texture of wood your covering, with the second coat spreading farther. We will be 1/2 checking them so the timber overlaps each other, resulting in a very strong joint that will help stop the gate moving or twisting. Many of our residential and commercial fence customers also choose a matching gate.


Use a pencil to mark where the hinge should go on the post, and then put the gate down. On the other side of the house we made a two door swinging gate to accommodate larger items in and and out of our backyard, like a mower, wheel barrel, motorcycle and those types of items. Be prepared to replace the odd troublemaker down the road to keep your fence looking right. If you want to upgrade the wooden gate in a privacy fence, or some other kind of wooden security fence, you can learn how to plan out the job properly, build the. An electric fence wire installed on the opposite side of the post will prevent horses from rubbing on or chewing the board.

Or install the hinged gatepost slightly out of plumb to encourage the gate to close itself. Maybe your dogs are fence fighting with the neighbor’s dogs or kids are sticking their hands through the fence and you’ve been finding tiny fingers in your lawn clippings. This added to the time it took (since we couldn’t just cut off the top when we were done…we had to make sure the tops of each of the fence posts were level with each other as we installed them), but I think it is a good look. Finally, find out if your planned fence will interfere with any underground utilities. Speaking of invisible pool fences, the photo above is of a plexi-glass pool fence.

It can be less than 45 degrees, but no flatter than 45 degrees as it won’t be doing anything to support the gate. If using T” hinges just ensure the gaps on both sides of the gate are even (using a couple of wedges for this is helpful) and screw the leaf part of the hinge to the post. However, as of weekly pre-release 12w01a, fence gates have a refined hitbox matching that of a fence.

However, if you do use insulated gate handles, always situate the handle on the end toward the fence charger, so that the gate wire” will have no electricity because it’s disconnected from the charger when the handle is undone and the gate is open. I cut two backer sections from the new wood at about 67.5 inches because, again, I wanted to leave some possibility for wood swelling. This type of pool fence is very strong and durable but often needs painting after a few years. I have dogs that can rip up a wooden fence with their teeth when they want out.

Take extra care with your anchor posts to ensure they are sturdy enough for your chosen fence style, buried deeply enough for your soil type, set in concrete, and well braced. I used the same pickets for both gates at my house, but notice on the small gate I put the dogeared edge on top and cut the bottom straight. As you can see from this close up picture above, the child-proof fence is made of a vinyl and plastic material in a mesh pattern. Since the fence is solid it also helps keep debris out of your pool better than most fences.

The way you anchor the post will depend on the size of the fence, but in general, you need to make sure the post doesn’t wiggle with weight. Wood posts from 5.5 to 8.5 feet long and from 2.5 to 8 inches or larger diameter are readily available. There are so many ways to customize your wooden gate designs and all it takes is a little imagination. I’m not talking about 5 minutes of thinking – I mean really laying it out on paper and considering the nuances, especially if there’s a gate involved.