Blades For DeWalt DW735 Planer

If this is your first visit, be sure to check out the FAQ by clicking the link above. From quickly dimensioning lumber in the dimensioning mode to a silky smooth finish on a variety of wood species in its finishing mode I continue to be extremely happy with the performance and features of this portable thickness planer and would highly recommend it to anyone looking to purchase a portable thickness planer. SUGGESTION: Figured I would remove the blade bolts one at a time (keeps everything @factory OEM settings) coat with Anti-Seize and re-attach. I have gotten good milage out of the Dewalt blades except on cherry which is tough on blades.

The crank handle gets locked into place with a screw, tightened with the T-handle tool that resides right on top of the planer. I wish to buy a planer and want to learn, I am not trying to challenge your opinion or question your knowledge as I will freely admit that I know VERY little here. I am very pleased on how much Bd. Ft. I can put through before the blades were dull. I recently talked with a DeWalt technician at a local DeWalt service center and he has told me that the DW735 cannot be rewired to 220V. The finish on hard wood is very good at the slower speed (which is still a decent feed rate) and blades are easy to access.

I feel that I was gouged buying the DeWalt knives from the tool store and could probably get some carbides for a fair price. Snipe can almost always be eliminated by simply supporting the work piece so it remains perfectly flush with the surface of the planer until it’s totally outta there. Using the Dewalt 13″ blades, the unit would have tripped the breaker in seconds.

I found this to be a great planer but live in Montana and in the winter in the cold garage the feeder rollers won’t pull the wood through. There used to be a really good sharpening service close to home that told me they could resharpen the Delta blades 3 times before they needed to be replaced. The DW735 is powered by a 120volt/15amp motor that delivers 10,000 RPMs (cutterhead speed) and has the ability to feed material at two different speeds (96 & 179 cuts per inch) through a three knife cutterhead for fast stock removal and a glass smooth surface finish in a variety of materials. But first I’ll lightly go over the planer itself and give some of my thoughts on it.

The 13 inch knives that the Dewalt DW735 is better than its predecessor which is the DW734 and while this may not seem like a big deal, the half inch can create a lot of difference especially when things are already being cut. Of course, the extra blades offered by the DW735X may prove to be better especially when the blades become dull after being used.

Per DEWALT’s specs, the planer has a powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutter-head speed) that handles larger cuts in wider materials with ease. But for my Delta 22-560, I’m still using the Jesada blades I bought at 50% just before Jesada went under. Since this is the older model made by Dewalt, all of the extra things that the Dewalt DW735X has is not being offered by the Dewalt DW735.

I found the DeWalt DW735X planer to be an excellent addition to my home workshop. I had been having trouble getting good surfaces from the planer on some of these difficult gems of nature, despite using appropriate technique. For the last five years I’ve used the DeWALT DW735 thickness planer in my shop and it offers a major design improvement over the competition.

You can hone the blades to lengthen their lives but I seriously doubt if you can really re-sharpen (grind and hone) them because thanks to the index pins of the cutter head, (1) you can’t grind away too much material and (2) the amount of grinding has to be exactly the same from each blades. The mobile thickness planer stand and the optional folding planer tables can be purchased separately but I have seen some retailers package either optional accessory along with the planer. When making finish cuts or when cutting hard woods the #1 speed slows the feed rate to produce 179 cpi (14 feet-per-minute) which also reduces stress on the knives.

We offer an impartial DEWALT DW735 Review and cater you with the pros easy woodworking projects toys and cons of the thickness If you’re interested atomic total 49 buying the. It’s ironic that this re-sharpen DeWalt 735 knives” thread would come along now. They say they have a huge order list already and if you want some, get your name on the list ASAP. After using Grizzly and Delta Power Planers, this DeWalt is a breath of fresh air.

While hogging through a not-particularly nasty knot, about a third of one of my planer’s knives went flying. DEWALT DW735 XV AMP bakers dozen Corded This extremely powerful planer from DeWalt has angstrom unit 2 coffee table plans simple step on it gearing box that allows for 96 operating theatre 179 cuts per inch to. I’ve had it for plunge router reviews close to manikin DW735. I checked out new planers and decided that three blades were better than two and got the DeWalt.

To switch to carbide you would have to change the head to a Shelix type, which will cost around $500.00, which would be a poor investment for a lightweight machine. Upgrading my DW735 planer to the Shelix Cutterhead made the machine a pleasure to use and allows it to produce the sort of results that I had hoped for when I bought the planer. You can hear the motor change pitch when it is faced with a wide slab but it’s never bogged down on me.

I do like the Shelix, but I don’t really want to invest in one for such a light-duty planer as the DW735 (not that it’s particularly light-duty, but it’s not exactly industrial). Couple a modern benchtop thickness planer with a hand-held metal detector and you’ve got a terrific combination for salvaging wood from the urban forest”. The HSS blades made by Infinity, at around $90.00 a set, reportedly stay sharp much longer than the DeWalt stock blades which have had a reputation for dulling especially fast. When you keep the knives sharp and don’t overtax the amount you take off in the single pass, this planer does exceptional job.

Not being a gen-u-wine woodworker, I unfortunately have no kick-ass dust collection system set up. I may invest in one anyhow, because I do have quite a bit of planing left to do, and planing with ANY planer generates an incredible amount of wood chips. This is my first time using a planer of this size (portable), I’ve only used comercial large planers in past employment and come to think of it ths has less snipe than those ever did, only differance is size of width and portability. I love this setup and highly recommend it for anyone who is looking for a decent planer setup and has the room.

Usually you can stagger HSS blades around so that one of them is covering one side of the nick, the other covers the opposite side. Even with the bag full the planer has no problem shoving more chips into the bag and slightly compressing what is in there. The planer has a 1/8″ maximum depth of cut, a width capacity of 13″ and a depth capacity of 6″. The problem is that there are 8 (Eight) screws holding each of the three blades.

One of the complaints on this unit was that carbide blades are not available, not so they are available from several aftermarket manufacturers. The DeWalt #735 arrived in the shop at an opportune time as several planning tasks in various thicknesses and wood species were on the bench. I’m looking for better knives, though, and will try some aftermarket blades in the future.

Learn to use a bench-top planer correctly and avoid common problems like tearout, snipe and ridges. As it enters the DEWALT DW735X and hits the feed rollers, the material is propelled through and out the back. I kept the original blade in the saw which has given good result so far without too much splinters as it exits the cut. Out of the two the Dewalt DW735X is the newer one of the two which means that it may have some other offerings that are not available with the Dewalt DW735.

I have used the Craftman, Delta, and grizzly planer which all worked very well, so I was apprehensive about using another brand. I have run a few hundred feet of poplar and a little cherry through mine, and flipped the blades once. Although the DW735 is considered a portable” thickness planer it does tip the scales at beefy 92lbs (42kg) but DeWALT has incorporated a large pair of carrying handles into the top of the unit making carrying to a job site or moving the planer around the shop, a lot easier. I was curious to see if a light honing on the blades would make them last longer.

Getting access to the knives is a matter of using the included T” wrench that is conveniently stored in the top of the planer and removing the four screws that hold the top cover in place. The powerful motor and ejection system on the DEWALT DW735X spews out an impressive amount of wood debris, and it spews it out with a lot of gusto. I would try their HSS blades before springing for the carbides and consider what it is going to cost to sharpen them.

After playing around with the planer shortly after assembling this setup I completely eliminated snipe. A few months after I bought the planer, the blades were available for a significant savings at Amazon. I must be some sort of planer modding savant, because the installation took me about 45 minutes, about half the time I’ve heard from others. I opted to mount my planer on the DeWALT DW7350 Mobile Thickness Planer Stand an optional extra but it certainly makes it easy to move the planer around my workshop. People can be sure that if they have the DW735X model, they have some extra blades that are available.