150 PSI Air Compressor Regulator Kit With Dial Gauge

This air compressor regulator allows any craftsman with air tools to control outlet pressure! When I must do some light milling on my mini-mill, a continuous stream of air across the bit both keeps it cool and blows the chips out of the way. My dad bought one of the monster compressors with the 15 gallon tank that goes up to like 150 psi. It has the bare minimum airflow for your average impact wrench, and MAYBE your smaller air hammers/chisels, like for lifting floor tile. Air nailers are great tools, making some repetitive nailing tasks go amazingly fast.

This is probably the very least you’d want as a portable setup for serious air tools: DeWalt 1.8HP 4.5-gallon 200PSI Compressor It will inflate your tires no problem, and will drive pretty much any nailer you want to use. A leaf blower simply won’t cut it, but the stream of air from my air hose works nicely. Some tools may not work on small compressors, so look at the air requirements for any tool. The K-0058 Cylinder Sleeve Replacement Kit fits many older model Oil-Free air compressors from DeVilbiss.

These Oil-Free Air Compressors were sold under the Porter Cable brand name and were sold by various stores including Home Depot, Lowes, Menards, Ace hardware, Costco, Wal-Mart, Sams Club, Sears stores, Carter Lumber and other fine retailers throughout the country. You want to depressurize the air line for lower pressure tools, so it vents; important for delicate tools and long lines. I have that craftsman compressor and I use it at 2 or 3 am in the garage all the time. Only reason for 4 stars and not 5 is because some panels were delivered chipped.

Drain the Craftsman air compressor tank daily and operate the pressure relief valve daily. This K-0058 Cylinder Sleeve Replacement Kit fits both the single cylinder oil-free pumps and the twin cylinder oil-free pump made by DeVilbiss and includes the following parts in the replacement kit. You will need to take the compressor head off and replace the head seals and piston rings. It’s quite a good value, however it’s not for anything larger than 3 to 5 gallon compressors. This tells you how much total flow the compressor can provide on a constant basis, and also how fast it will fill the tank.

Larger tanks allow a larger reserve and sometimes running tools that take higher flow for short periods than the compressor can provide. It has a 3 gallon tank like next air compressor, costs about the same, and has 1/5 of the flow. This fall I used an air hammer to break up a large amount of cement into small enough pieces to move. Remember that 1HP = 746 watts, and thus you can’t run more than 2 HP on a 15 amp circuit (1800 watts – line loss). The following is a partial list of Delta Portable Air Compressor model numbers that are using the K-0058 Cylinder Replacement kit with -ring.

When 200 feet of hose won’t reach, I disconnect the temporary tank I have hooked inline with a quick disconnect fitting, and I’ve got 10 gallons of air available for use anywhere I want to carry the tank. I’ll try to point out that a compressor has many other uses, in fact, I’ll wager mine is one of the most useful tools in my shop, certainly the first thing I turn on in the shop after the lights go on. It can drive an impact wrench, pump up tires, blow out water lines to winterize plumbing. For example, some tools are marginal on my compressor except in short spurts, which is only rated to provide 5.8 CFM.

There is a quick release fitting on the tank that goes to another connector which connects to the hose. It took us between 4 and 6 hours to install it. Stud finder, level, measuring tape and drill are a must. If the air compressor starts without the extension cord, check the manual for proper extension cord gauge and length. Remove the extension cord if you are using one and test the air compressor directly on household power. I added quick connect (male & female), so I can connect to any air supply when using my air brush, maintaining 35lbs.


When I must do some light milling on my mini-mill, a continuous stream of air across the bit both keeps it cool and blows the chips out of the way. My dad bought one of the monster compressors with the 15 gallon tank that goes up to like 150 psi. It has the bare minimum airflow for your average impact wrench, and MAYBE your smaller air hammers/chisels, like for lifting floor tile. Air nailers are great tools, making some repetitive nailing tasks go amazingly fast.

This is probably the very least you’d want as a portable setup for serious air tools: DeWalt 1.8HP 4.5-gallon 200PSI Compressor It will inflate your tires no problem, and will drive pretty much any nailer you want to use. A leaf blower simply won’t cut it, but the stream of air from my air hose works nicely. Some tools may not work on small compressors, so look at the air requirements for any tool. The K-0058 Cylinder Sleeve Replacement Kit fits many older model Oil-Free air compressors from DeVilbiss.

These Oil-Free Air Compressors were sold under the Porter Cable brand name and were sold by various stores including Home Depot, Lowes, Menards, Ace hardware, Costco, Wal-Mart, Sams Club, Sears stores, Carter Lumber and other fine retailers throughout the country. You want to depressurize the air line for lower pressure tools, so it vents; important for delicate tools and long lines. I have that craftsman compressor and I use it at 2 or 3 am in the garage all the time. Only reason for 4 stars and not 5 is because some panels were delivered chipped.

Drain the Craftsman air compressor tank daily and operate the pressure relief valve daily. This K-0058 Cylinder Sleeve Replacement Kit fits both the single cylinder oil-free pumps and the twin cylinder oil-free pump made by DeVilbiss and includes the following parts in the replacement kit. You will need to take the compressor head off and replace the head seals and piston rings. It’s quite a good value, however it’s not for anything larger than 3 to 5 gallon compressors. This tells you how much total flow the compressor can provide on a constant basis, and also how fast it will fill the tank.

Larger tanks allow a larger reserve and sometimes running tools that take higher flow for short periods than the compressor can provide. It has a 3 gallon tank like next air compressor, costs about the same, and has 1/5 of the flow. This fall I used an air hammer to break up a large amount of cement into small enough pieces to move. Remember that 1HP = 746 watts, and thus you can’t run more than 2 HP on a 15 amp circuit (1800 watts – line loss). The following is a partial list of Delta Portable Air Compressor model numbers that are using the K-0058 Cylinder Replacement kit with -ring.

When 200 feet of hose won’t reach, I disconnect the temporary tank I have hooked inline with a quick disconnect fitting, and I’ve got 10 gallons of air available for use anywhere I want to carry the tank. I’ll try to point out that a compressor has many other uses, in fact, I’ll wager mine is one of the most useful tools in my shop, certainly the first thing I turn on in the shop after the lights go on. It can drive an impact wrench, pump up tires, blow out water lines to winterize plumbing. For example, some tools are marginal on my compressor except in short spurts, which is only rated to provide 5.8 CFM.

There is a quick release fitting on the tank that goes to another connector which connects to the hose. It took us between 4 and 6 hours to install it. Stud finder, level, measuring tape and drill are a must. If the air compressor starts without the extension cord, check the manual for proper extension cord gauge and length. Remove the extension cord if you are using one and test the air compressor directly on household power. I added quick connect (male & female), so I can connect to any air supply when using my air brush, maintaining 35lbs.

When I must do some light milling on my mini-mill, a continuous stream of air across the bit both keeps it cool and blows the chips out of the way. My dad bought one of the monster compressors with the 15 gallon tank that goes up to like 150 psi. It has the bare minimum airflow for your average impact wrench, and MAYBE your smaller air hammers/chisels, like for lifting floor tile. Air nailers are great tools, making some repetitive nailing tasks go amazingly fast.

This is probably the very least you’d want as a portable setup for serious air tools: DeWalt 1.8HP 4.5-gallon 200PSI Compressor It will inflate your tires no problem, and will drive pretty much any nailer you want to use. A leaf blower simply won’t cut it, but the stream of air from my air hose works nicely. Some tools may not work on small compressors, so look at the air requirements for any tool. The K-0058 Cylinder Sleeve Replacement Kit fits many older model Oil-Free air compressors from DeVilbiss.