Nail Gun Buying Guide Types And Requirements

A nail gun can be used for almost any project in which you would use a hammer and nail. That was straight out of the box and straight to the air hose, with a couple of drops of oil first of course. Advice on when an air compressor can be used for DIY projects and how to use a compressor safely. Specifically, I will use it to build built-in bookshelves in 2 of the rooms of my house, possibly to finish a small attic space, and other random jobs.

You may even look at a list of tools, and the CFM of air they require to make sure your compressor will handle any future tool purchases. The size of a compressor’s tank it determines how long air tools can run before the compressor turns back on. Tank sizes are rated in gallons, and run from 1 gallon all the way up to 80 gallons. Your nail guns will fire up nails harder, your spray paint tool will apply paint in a smoother and more even fashion, and your tires will inflate much faster and harder. In terms of both size range and magazine capacity, each nail gun is right in line with industry norms.

With the compressor in another room you save yourself some loudness while you’re working, and a compressor can be used for other things like paint sprayers and impact wrenches and filling tires. Cheap nail guns have their limitations, but the DeWalt Finish Nailer can handle 16-gauge nails from 1.5 – 2.5 inches. These compressors can be more expensive than other portable units because of a more powerful engine and larger air capacity.

However, the compressor and nailer can be purchased separately, and Porter Cable has several different sizes of nail guns available. In regards to the PORTER-CABLE C2002-WK Oil-Free UMC Pancake Compressor , it’s (obviously) a pancake compressor, which is among the most common portable compressor subtypes around. There are many types of air compressors, each designed for specific applications.

Then carefully align the nail gun with the path you want the nail to take, just like when you line up a pool cue before striking the ball. I do let the air out after each use, but I didn’t know to actually tip it and drain it. Last time I used it, rust water spilled out, so I know I’m in trouble now. Here’s why: eventually, the rubber will break down leaving a small gap between the roof surface and the nail head. Make sure the compressor is plugged in and that the fuse or circuit breaker isn’t tripped.

Still, all six maintained sufficient air pressure to power two large nailers at a normal work-application rate. The portable wheelbarrow air compressor also reduces maintenance efforts and costs with its oil-free pump (a pump type that the Makita MAC700 lacks). The best way to solve this problem is with some sort of depth control that can be used with normal air pressures.

The issue with quality guns is setting/maintaining air pressure, light but periodic lubrication of air and proper placement. In that case, you’ll need a finishing nailer, the key difference, as mentioned above, is the size of nail it’ll fire. Lastly, this nail gun is lightweight, but it is also rather bulky, making it difficult to maneuver within the confines of tight spaces. There are a total of 6 different nail gun types: Framing, roofing, flooring, concrete, and finish nail guns as well as those which are used for some of the finer work like brad nailing, tacking, or stapling.

While smaller nail guns are designed for precision work, a framing nailer is really best suited for quick projects that require large nails. You can take it off electric once the tank is full and use it as a portable but you have to keep an eye on the pressure in the tank to then plug it in and refill it. PRO TIP: If you already own an air compressor, make sure that your unit meets the requirements of the nail gun that you purchase. Twin-stack compressors have dual air tanks which hold more air and thus there is less time between compressions.

Those are the ones you’ll use the most for trim/ finish work and smaller projects like the book shelves you talk about. These heavy-duty models have high horsepower (HP) or cubic feet of air per minute (CFM) rates with humongous storage tanks that enable usage for long periods of time in an uninterrupted fashion. The compressor comes with a 6.3-gallon steel tank for better air intake and wheels to increase portability from one project to another.

We like the ones on the Campbell Hausfeld MW250000, shown, and the Husky because they use a larger gauge for the regulated hose pressure-the gauge you need to see most often because it’s the one you adjust for different tools-than for the tank pressure. When the desired pressure is achieved, push the knob back down to lock it so it cannot self-adjust from normal vibration of the compressor.