The cage should be roughly 4 times the size of your rabbit at the very least. And just like what you did from the side-frames, cut and cover both the front and back sides of the rabbit hutch. Cage sizes also should be decided in conjunction with the amount of exercise time and space the rabbit has. Remember to make any slats fairly close together so that the rabbit will not get his head stuck and be accidentally injured or strangled. Even with a wooden cage, you still need a wire floor to keep the cage clean and disease free.
When it comes to the outside of the hutch, the most important consideration is that you don’t want the base of the hutch to touch the ground. One of the features that I do like about this hutch is its ventilated design which offers your pet a safe and comfortable place to stay. Make sure the frame is level and screw these triangles to the front legs and top of the frame. Housing a rabbit outdoors without ever interacting with them will result in a rabbit afraid of humans.
With our step-by-step directions and many photographs clearly illustrating each next step, you can confidently build your own rabbit cage, and hutches, runs and pens! It is important to remember that you will need the hole you are cutting into the hutch for the door to be 1” smaller. Make any final adjustments to the spring latch so that it will latch with reasonable ease and puts the appropriate pressure on the door to keep it closed. I went in there room today to make sure they have been properly cared for and they had no water.
I encourage rabbit owners to take design elements from several of these plans to make something which will work for any given set of circumstances. Make sure the place has proper flooring allowing the rabbit to hop, stand, and run without slipping – a concern especially important for older rabbits. The rabbit must be protected from sun, rain, and wind on all sides, and yet be allowed adequate ventilation. Outdoor Hutch Plans III Based on University of California leaflet 2737 Free Rabbit Hutch Building Plans.
Remember the bigger the better for your bunny and for you to as it will be easier to clean out and also you will get so much more entertainment watching your rabbits binky and run at great speeds. The bunny should still have a home base such as a large cage or pen with a den available to him. This is a matrix system with a mix of tunnels, runs and cubes, with a 6ft hutch as a base. Rabbit wire should not be painted or plastic-coated, because bunnies chew on everything, which will expose the wire to rust and the bunny to potentially harmful substances in the paint or plastic. An important part of rabbit care is to clean your rabbit’s cage daily to help prevent any illnesses.
This is because you need to cut a roof for the cage, and a roll 18” wide will not cover a 24×24” cage. Finish installing the last ramp and the 1-square piece to the top, and then close the cage up and go around and secure everything! Today, many European breeders still use solid-floored cages, but most American hutches combine wood and wire to produce secure and sanitary rabbit housing. The site was founded by veteran rabbit owners Abi Cushman and P.A. Smith of New London, CT, who currently share their home with two mischievous agouti rabbits named Coco and Cosette.
Although, we were talking about maybe adopting him a bunny friend from (Tampa Bay Houe Rabbit Rescue) because we can foster to adopt and make sure it works with both of them… But we’d need to do more research on bonding and taking care of 2 bunnies. Once you assemble the outer perimeter of the cage with your cube grid square sides, you can step back and look at your masterpiece. Although they don’t work quite as well as a wooden box trap, a cage trap is still a very effective way to catch a nuisance rabbit. By gradually increasing the space, your rabbit will not feel overwhelmed by a large area.
Hi Lindsey, This is late in the answer, but maybe you’ll still get it. The habitat with the little house on it is a premade rabbit outdoor hutch (google them) and then an add on chicken wire pen. To make a cage door use cable ties on one side as hinges (don’t fix them too tight or the door won’t open) and use a bull dog clip to latch the door closed. Make sure that you have a good pair of wire cutters on hand so that you can adequately cut the wire. The hutch goes beautifully with my furniture and even matches the wicker ottoman.
Remember to give your bunny plenty of exercise outside his cage in a rabbit-proof room. After you use the cable ties to connect the four walls together at each square grid, you will find that you can manipulate the cage to be various shapes, e.g. triangle, pentagon, etc. You should also decide whether you want to install baby-saving wire around the bottom of the cage. If you have more question, I would be more than glad to assist you with the build. This first set of NDSU hutch plans from NDSU feature a single suspended row of metal cages, within a wooden frame. The frame needs to be bigger than the cage and uses the L brackets to hold hutch.
Taking it a step further, larger operations might be best served by a rabbit shed. Be careful not to make one corner too tight, as you might end up not being able to connect the sides on the opposite end of the cage. You can creatively design your own rabbit hutch, in lieu of following traditional patterns, to keep your loving pets happy. Airflow must be maximized by placing a cage in an open area, so the wind can help cool the animals. Building the front door for the hutch is an easy procedure, as you need just 2×2 lumber and a piece of chicken wire. When devising a plan for watering rabbits — and feeding them for that matter — consider how much easier it is if you don’t have to open the cage daily.
If you are placing your cage as part of an external hutch, then you won’t need to have so large an area, although you will need to have a reliable exit from the cage so that the bunny can get in and out of the cage easily. Many males waste a lot of time marking a mating cage that is impregnated with the smell of their predecessor, and the cage is also a possible site for the spread of diseases. Attach the door to the hutch with the hinge at the top, so that to open the door, you push the door up into the cage. But if you have decided to keep the rabbit outdoor then you need to have a rabbit hutch.