Woodworking is at its most rewarding when it’s time for the wood finish to go on. You’ve planed, scraped, sanded, sanded and sanded. The key to getting an evenly stained surface is to saturate the wood thoroughly and then wipe the stain off evenly. Working Green Wood with PEG by Patrick Spielman describes how to turn inexpensive green wood into clocks, tables, bowls, table legs, and more. Address: Faraday Close, Harworth, Nottinghamshire, DN11 8RU, UK. Tel: 01302 744 344. The finish itself is tinted so the color lies on top of the wood instead of being absorbed into it like penetrating stain. Wood finishing isn’t complicated, but it does require patience and attention to detail. Sealing end-grain prevents the wood from absorbing too much stain and creating very dark areas.
Depending on how good a job you were able to do with the stripper, you may not have a lot of sanding to do. Start with 120 grit paper to clean off any finish which may remain and to smooth out any bad places in the wood. Choose from over one hundred stain colors, using the Minwax® Stains Color Guide or a sample wood chip board at your local Minwax® retailer. Your goals are to eliminate the sawmill burnish” (shiny surface left by the planer), smooth off any standing rough wood fibers and sand out any blemishes.
Shop-made sanding blocks of 3/4″ wood with 1/4″ cork or neoprene glued on the business end are my favorites for use on bare wood. We have a passion for our craft with all things wood and would very much like to pass on to you this enthusiasm to help you achieve your ultimate goal and as you are browsing our web site you must have the desire to achieve something special.
Legnotool offers a wide variety of woodworking machines, tools and accessories. This step is crucial for achieving a uniform wood surface that’ll absorb stain evenly. The final colour result is determined by four factors: the colour of the stain selected; the nature of the wood and how porous it is; how long the stain is left on, from a few seconds to a maximum of 15 minutes; and the extent of wiping when removing excess stain. For example, it’s easy to lighten any tone of Minwax® Wood Finish by adding Minwax® Wood Finish Natural. Once the piece is free of the old finish and has had time to dry, you’re ready to sand the wood.
For a while early in the process, until you start getting down to the wood underneath the mess, you may feel that you have completely ruined the piece. With this wealth of knowledge and experience plus our comprehensive range of wood finishing products, whether it be external furniture or internal floors you wish to finish, we have the right products for you!