Benjamin Moore Paints — How To Prepare Exterior Wood And Decks For Staining, Deck Stains

Outdoor project finishing, like all finishing, begins well before you open a can of stain or finish. Deck stains have stronger binding agents that hold the stain together and make it more resistant to wear. If you can move the furniture inside your garage or other covered work area, do so. I realize this is impossible for the playset, so choose to work on an overcast day if possible. Use furniture glides to raise the piece slightly off the ground so it doesn’t sit in puddles of rainwater. Year 3 Behr Weatherproofing Wood Stain: went on nice but did NOT hold up to its reviews here in Oregon. Stain and oil are not mutually exclusive as one simply colours while the other preserves.

Our line of SuperDeck® products helps you enhance the appearance of your deck and add years of enjoyment to the life of your outdoor living spaces. The TWP Stain is an easy to apply formula which makes it the perfect deck stain for the enthusiastic do-it-yourselfer looking for professional results. Minwax® offers a variety of easy-to-use products to help clean and repair wood that is chipped, cracked, scratched, even decayed, to its original beauty.

Best results with varnish over raw wood are obtained with applying a first coat of varnish diluted 50-50 with mineral spirits, then applying 2-3 additional coats of slightly thinned varnish (1 part thinner : 9 parts varnish). However, once they do wear, the damaged finish will be very evident because the natural wood color will show through the otherwise colored finish.

Behr is occasionally recommended and is a deep penetrating, acrylic-based stain. If you havent already checked out the Aug 11 issue of Woodworkers Journal covers Outdoor Furniture Projects and finishes for them. From cedar siding to redwood deck, wood offers a rich, warm welcome to any home. If applicable, remove all peripherals and extras from the outdoor wood piece you are staining. If the deck is pine, II will usually choose a solid colour stain in order to get colour consitency and to provide maximum protection.

Stain is the choice when you want to let some of the natural features of the wood shine through but still shield your investment from the elements. When you’ve come to the decision to refinish your deck it’s important to understand the right and wrong way to do it. Cleaning a deck is the most crucial step in the wood restoration process. Storm System by California Paints® Category 2 semi-transparent exterior finishes.

If you use an oil preservative, you need to recoat your wood every 12 to 18 months. In years past, many homeowners used oil-based or alkyd” deck stains, but these products have some major shortcomings: for one, they soon become very brittle; and second, they absorb the sun’s harmful UV rays. The pigmented, or colored sealers, will keep the furniture looking spectacular.

To insure film adhesion on PT wood, be sure to give the raw wood a little tooth by sanding lightly with 120 grit paper prior to finishing. I usually use the Semi Transparent Redwood because it gives a rich redwood tone and lets the wood grain show through. If water gets into the cracks, it soaks deeper into the wood causing even greater expansion and contraction forces that cause the cracks to get deeper and wider. Consumer Reports said products making the rankings list of winners” still looked good after the equivalent of up to nine years on a house, or three years on a deck for stains. Wipe off any excess that doesn’t soak into the wood after letting it sit for at least an hour.

As with Arborcoat, Behr Waterproofing Wood Stain comes in solid, clear and semi-transparent treatments. Your page has been extremely helpful for us as we clean and plan to treat our Mahogany deck. Since paint blocks UV rays better than a clear finish, your best bet is to apply a quality exterior primer, topped by a exterior latex or oil-based paint. Over time, the wood under clear stain will continue to discolor, forcing you to eventually move to the next category.

This is a generality, and some stains can be slick, but for the most part, stains are more of a flat surface that protect the wood without creating a very slippery surface. Exterior semitransparent penetrating oil-based house stains that contain a mildewcide and that are water repellent would also work well. While stain will change the color of the wood, a clear preservative will darken and enrich its natural color.

Its sister company, Olympic Paints and Stains, markets Deck Primer, and alkyd/oil sealer intended for use on exterior wood prior to staining with solid colors. They soak into the rough fiber and protect the wood from weathering, but they don’t form a surface film and therefore won’t peel. Apply it with short even bursts for a smooth, durable finish that will hold up under tough outdoor conditions. PAINT & STAIN GUIDE, EXTERIOR found at – online encyclopedia of building & environmental inspection, testing, diagnosis, repair, & problem prevention advice. Seasonal changes in the moisture content of wood affect the durability of finishes.

A clear finish shows off the wood’s natural grain and texture but tends to only last a year, and it won’t keep the wood from turning gray. Stain is absorbed better by the bare wood than the gray so areas that aren’t sanded will will show. Advantages: Thick protective barrier keeps the wood safe and offers a strong first line of defense against the elements.