Made with wood, with vinyl or screened chain link, a privacy fence is typically 4′-6′ tall and solid, designed to block an area from view. My homeowners association requires the fence to be stained and allows fences only in the back yard. To enter that stretch of fence as 100′ or even 96′ in one field would be incorrect. Hinges that are truly out of alignment means that your gate won’t swing at all. You can get wicker privacy screens in a variety of colors and some very interesting designs. Compare the facts on our PVC horse fence, 3 Rail vinyl horse fence & 4 Rail Horse Fence!
Some agencies require computer-aided design (CAD) drawings (or professionally stamped drawings) of the fence with specific sizes and measurements, as well as materials, called out. A more direct way to get the privacy you want in your backyard without installing a fence is to use wicker outdoor privacy screens. Double swing gate – A hinged gate with two leaves, most often used to gate driveways or other areas that demand a wide gate.
If you must secure the gate to deter trespassing or to keep a small child or pet inside the fence, fashion a quick release system that doesn’t require a key or combination and that operates quickly from the inside of the gate in emergency situations. If you try to place a gate on an unsuitable fence, you could get a message to say it needs to go on a lower or taller fence. Adjustable steel gate kits for single or double vinyl gates drop rod included with double gate kits.
I looked at doing it myself, but it was a very large span on some land that slopes fairly steeply from one gate post to the other, so it was about as tricky as gates get. Since the gate will endure more use and wear than any other part of the fence, use secure gateposts, strong hardware and a well-built and braced frame. We ended up paying about $400 per gate, including wood and hardware, to have the builders do them.
Cut and install the top 1×2 pickets (Photo 12).Then screw the last two top rails and the bottom 1×8 rail into place with two screws into the 1×2 cleats at the end and then into the rails on the other side spaced about every 6 in. These screws clamp all sections together. That and you will need to measure and build a double gate, which meets in. How to build a double gate for a wood privacy fence ehow.