This set of plans is the easiest to build from the ones I have made so far. The first step of the woodworking project is to build the sides for the nightstand. We started by hitting up Lowe’s and picking up all of the wood that we would need. These beautiful nightstands feature pullout ledges and you can build them to build this nightstand with a wood bedroom nightstand tables how to build. Actually, I held my night stand at level (marked the corners so I knew where it was supposed to be). If you are to find the right piece of wood in the recycling yard it is your responsibility to put it to good use, to bring that legendary texture forward.
Before mounting the drawer pulls, I put 3 coats of General Finishes Arm-R-Seal wiping varnish on the outside and drawer fronts. This plan of pallet wood nightstand can be made at home comfortably and it add handle to pull the drawers or door out. Just a quick note – paint/stain these supports a different color than the other pieces of the nightstand for a great pop of color. Build the back for the nightstand out of 3/4″ plywood and smooth the edges with fine-grit sandpaper.
On Tuesday I shared my new nightstand that Jesse built for me, because apparently that’s our thing, making furniture. Â I used a bit of Gorilla wood glue and 1 1/4″ pocket hole screws to attach my shelf pieces to my sides. If you want to stifle the noise, get a padded basket (or add padding to a regular one). It’s important to remember nominal lumber sizes when building your stuff or your plans won’t match the lumber available at the store (or my plan here!).
Even tho I took measurements of heights of both dresser and bed, the only way I could imagine if it was going to work was to stand beside the dresser then lean way back, imitating the act of reclining! I decided to give it a go anyway, and it turns out it was super, super easy to build my little floating night stands, using just a few basic tools that I already owned.
Build the door out of 3/4″ plywood and secure it to the frame of the nightstand using hinges. Start by marking the drawer openings in pencil on the face of each piece of plywood. A popular IKEA choice that can be transformed through the items planted in it. Combine silver and gold accents with warm textures like wood and paper on a white or black background piece. How to build a nightstand (or two) Do it yourself tables do it yourself tables search now. Before you start cutting the drawers, take the measurements of the drawer openings and adjust as necessary, leaving enough room for your drawer slides (1/2″ on each side for me).
Because this is an inset drawer, I suggest that you install your drawer slides on the nightstand cabinet first, then with your drawer box inserted into the nightstand, use wood shims to ensure even spacing between the drawer face and the face frame of the nightstand. After a night of too many drinks, you wake up in a strange room, unable to recall what happened the night before. Measure and mark each of the drawers in the same manner that you marked the front base piece. And here is the nightstand Â in action in the master bedroom Super functional, sturdy, and rustically cute. I hope you have found this tutorial on how to make a nightstand useful and interesting!
If you want a more versatile solution, you can get a compact USB charger that supplies enough power or a larger unit that offers both standard plugs and USB charging ports. Use the nail and string technique to draw the curve and then use the band sander to sand away the extra wood. Dowload the project plan, sit back, and watch as we show you how to build this beautiful project, step-by-step. If you plan to add a drawer like we did, check out our Basic DIY Drawer tutorial to learn how to make a beautiful, sturdy drawer without touching a router or table saw.
Only sand the wood for a glam rustic appeal, stain it for a changed and elegant wood tone with more stability, use paint to create a modern enchanting display of this miniature pallet-craft! The next time you make one of these (or any wood project) you may want to check into pocket holes, it would solve the screw length issue easily. Attach the trims to the nightstand and secure them into place by using brad nails. When it came time to build my night stand I busted out my Kreg Right Angle Clamps !
So, my point is, don’t look at just nightstands, keep an open mind, and you never know what you might find that would work better than your average nightstand. Lastly mount your drawer pulls by drilling through both the drawer box and the false front and use the long bolts the pulls came with. Before attaching the drawer face to the drawer box, go ahead and attach the trim to the drawer face panel. Table provides inside hidden storage options to store your night story books, mobiles.
The plan of DIY pallet nightstand makes it easy to complete it at home with the use of pallet wood with some skills and experience. Give your nightstand its iconic Shaker styling as you learn how to taper your legs to give them a smooth and uniform appearance. I think that was a waste of such a big pallet, it would of made a really nice table, but I love the nightstand anyway ill definitely be making this. Attach the Cabinet Top to the Cabinet Sides and Cabinet Back as shown with glue and 1” brad nails or wood screws. Seriously, if you want to build furniture you need to invest in a pocket hole jig!
Set the nightstand on a drop cloth in a well-ventilated area, and allow it to dry for 24 hours. Drill pocket holes in the outside face of the front and the back drawer pieces on both ends. Challengers also cover other bases; they work hard, build relationships, solve problems, and sell solutions in such a way as to connect more strongly and quickly with customer.
Curved nightstand / end table – , Buy curved nightstand / end table at close if your order totals $50 or more and you select value shipping, this item and any other qualifying items. I’m one that prefers even with or slightly lower than the mattress since I want to easily reach my cell phone, glass of water, or eye glasses while I’m lying in the bed. As you can easily notice in the diagram, we recommend you to build the legs out of 1×2 lumber and the horizontal supports out of 1×3 lumber.
But… I’m a sucker for a good vignette and there isn’t enough room on the top of a nightstand for that. Don’t blame your personal resolve: A study in Archives of Sexual Behavior found that 45% of men actually hoped their one-night stand would become a committed relationship. Cut the false drawer fronts to size and attach them from the back with 1-1/4″ pocket hole screws through 5/16″ holes drill in the front of the drawer box.
I doubled up on the poly seal for the top of the nightstand because I knew I’d be setting a glass of water there every night and didn’t want to leave any rings over time. If you are new to building, read through the GETTING STARTED section and other articles found under the BUILD tab in the menu on my site, it has valuable information about how to get started, tools and techniques. I love this little table and I am new to woodworking or should I say a wood crafter wanna be. I have only done very simple things, but this honestly looks so darn simple that I may have to try it. I’d love to incorporate it as a dog crate/night stand, for our Chihuahua.