Delivers superior polyurethane durability with the convenience of a water-based finish. If your budget is stretched then for surface-sealed floors you can use a basic soap and water mix to mop your floor (by the way, pH-neutral soap like dishwashing liquid is ideal, but check out Tip #4 before you do any mopping); for non surface-sealed floors you can find wax strippers and liquid or paste waxes from a number of manufacturers to compare prices.
Regardless of the finish, the following products should NEVER be used when cleaning any kind of hardwood floor: acidic products like vinegar, cleaners with ammonia, abrasive chemicals or abrasive soaps, bleaches, oil-based soaps, furniture sprays or furniture wax, acrylic or water-based waxes, or anything that claims to be a one-step wood cleaning product!
Rather, first ensure that you have a very soft felt or cloth mop; then ensure that after swilling it in your cleaning solution that you wring it out thoroughly so that it is damp, rather than soaking wet, before mopping the floor; change buckets as often as needed, and then go over the whole floor again with clean water alone – again with a damp mop.
As a rule, it is believed that you will get maximum performance by using both polyurethane and epoxy together for your garage floor coating Whether you are applying the coating yourself or hiring a professional, epoxy is best used for building up the thickness of your floor coating then following up with polyurethane as a clear coat to protect it. It will help protect the epoxy from yellowing and it will provide for a longer wearing and more scratch resistant surface.
This is a bit lengthy so please bear with me. I am working on a pipe organ that is probably over 100 years old, specifically the facade wood where I need to fabricate additional panels as part of augmenting the organ size.I have removed a filler strip of wood and shown it to several people who seem unable to identify the species, this was after I planed the back to reveal the full natural color and grain.
Hi – Im moving into a house with old hardwood floors – they have previously been coated with poly but hat has since turned rather yellow and very much worn away in many places – I have sanded my floors down back to the wood but now I dont know how to finish them – I prefer the look of paste wax buffed floors and I have all the equipment to do that, I just dont know if I need to put something on the raw wood before waxing.
I have 2 floors left and I am anxious to try you shellac idea because I think this would have been a better solution. Wood floors , countertops , walls, trim, doors, and other hardwood surfaces can be naturally beautified and protected with Waterlox, eliminating the difficult application, maintenance issues, and other disadvantages of polyurethane finishes.
Our contractor insisted we use oil-based and now I am feeling worried because I have a one year old baby who spends most of the day at home with me, crawling around on the floors. It has its own VOC category, so it has higher VOC limits than most wood floor finishes (see the chart below). Some tropical wood cannot be coated with poly, and even eastern white pine with its numerous pitch pockets can take days between coats, to set up. The same hold true if you are simply sanding by hand between coats, if the paper gums up, and the finish doesn’t powder, wait at least 24 hours.
Tung oil is derived from the nuts of certain trees indigenous to Asia and other parts of the world. Oil-based polyurethane also emits a prominent chemical odor that dissipates with time, and tools must be cleaned with a solvent—such as mineral spirits or paint thinner. Heating the concoction allowed for deeper penetration in the wood and made it easier to work with.
To get a few more years out of your wood floors you could try either one of these products: Holloway House, Rejuvenate, or Bona Pro series. It seemed easy to maintain, and removed all hint of preciousness to the floors. Oil based finishes tend to matt down a lot more in high traffic areas whereas lacquered floors just have individual scratches. Clean by misting the area with warm water and blotting with a clean white cloth. A good way of thinking of it is that polyurethane finishes are very durable against dents and dings, but will show scratches and wear.
The recent decade has also seen the introduction of water-reducible alkyds and urethane-alkyds (uralkyds) which are virtually identical to solvent based alkyds except they thin with water. The reason I clarify this is because there are other solvent based floor finishes that have certainly earned a place of honor in the floor refinishing trade. I have a rental that I’m considering in putting in wood flooring in the less trafficked rooms like living room and bedrooms upstairs. NEVER wet mop, clean with oil soap, coat with acrylic dressing, like Mop and Glow®, or apply paste or liquid wax to a polyurethane surface floor.