Why Mahogany? Amazing Grain, Luminous Color

Unlike some of its competitors, such as carpet or laminate, there are a plethora of hardwood flooring types to choose from, ranging from pine and oak to maple and cherry. Gel stain, for example, is most often suited for creating a wood grain appearance on fiberglass doors. There are just too many different opinions as to what color mahogany is or should be. Ultraviolet light, oxidation, and handling all contribute to the patina of an old piece of wood, whatever specie it is. However, Cherry and Mahogany respond to these effects more quickly and dramatically than many others.

Mahogany has a straight, fine, and even grain, and is relatively free of voids and pockets. As with Wonder Mulch and Black Wonder Mulch, Mahogany Wonder Mulch helps your landscape conserve water, suppress weeds, and protects against soil compaction and overheating. We still haven’t figured out if this is a change in the formula or simply the effect of spreading the color over a larger surface.

In the hardwoods section above, there are pictures of both the edge grain and the face grain for each type of wood. Appearance: The very fine and even texture of this well-known and popular hardwood, along with its striped figuring, complements the attractive dark reddish brown color of mahogany wood flooring. While photos of interiors and virtual decorator software may give you a general idea of what the end result might be, nothing will inform your decision better than seeing the floor color on-site, in natural light. Apply BOYSEN® Oil Wood Stain direct to bare wood without primers or undercoats either by brush, spray or by dipping in an open trough or tank.

However, apply several layers of stain, and each one adds color while combining with what is below. The stain was so easy to work with, and the top coat goes on beautifully and dries even better. Uses: Mahogany is used extensively in the crafting of Georgian, Empire and Federal reproduction furniture. If you are matching existing oak colors already in place, take into consideration where the mahogany comes from or what species it is. Another wonderful color with wood trim is a warm deepish brownish purpleish color. Over time we have tried several hidden fastening” systems on mahogany 1×4 and been disappointed.

The first trick or tip to this topic is realizing that 90% of the time you’ll need to custom mix a stain color to get the results you’re looking for. Cabot, like other stain manufacturers, has conservative application recommendations. Eastern Black Walnut is a dense medium hard wood that is slightly heavier than Mahogany. White Oak, an American hardwood, ranges in color from a very light color to a light to dark brown heartwood. African mahogany (Khaya ivorensis): This less expensive, but still beautiful, hardwood is found in a natural range that includes the Ivory Coast, Ghana, Nigeria and Cameroon in West Africa.

Specific gravity is simply the difference between the weight of a cubic foot of a wood species and the weight of a cubic foot of water (62.38 lbs.) To calculate specific gravity, divide the weight of the wood by 62.38. Genuine mahogany, according to most sources, ranges between 24 and 35 lbs. Both Swietenia mahagoni, and Swietenia macrophylla were introduced into several Asian countries at the time of the restrictions imposed on American mahogany in the late 1990s and both are now successfully grown and harvested in plantations in those countries.

Your page has been extremely helpful for us as we clean and plan to treat our Mahogany deck. I also recommend you install the mahogany 1×4 with screws rather than nails; use high quality stainless steel (316 grade) trim head screws. Much like wood movement due to climate change, wood color is something we have to anticipate and plan for; however, we sometimes have to accept that we don’t know what will happen, and so we just embrace it for the unique and wonderfully organic building material that it is. Mahogany naturally resists rot, so it’s a prized wood for boat decks and railings.

I was finally able to understand the ‘wood filling process’ and See” the final results of filled vs not filled to understand what to expect in my own project. It looked ok but the colour just doesn’t match the legs and the rest of the table, it is too dark and it was only one layer. After staining mahogany (and after it dries!), protect it with your preferred top coat like varnish, shellac, lacquer or polyurethane. As you treat, have a rag handy and wipe up any excess oil that does not soak into the mahogany within 5 or 10 seconds.

If you are able to get some photos taken in natural light both close up of the problem areas and from a distance and also the other areas of the table for comparison. I settled on MiniWax products (Stainable Wood Filler, Sanding Sealer, Red Mahogany Stain, Dark Walnut Stain). In its natural state mahogany has a brownish, ruddy hue that ages into a uniform color that’s hard to describe without waxing poetic. It is worth noting that the varnish will darken the overall finish of the stain so it is worth doing a small test area to ensure that you are happy with the colour. The tannin in the tea actually reacts with the wood to bring out the color change.

Because the color of the cabinet will change, later additions will not match your existing cabinetry. We need to decide what type of wood to use for the bookshelves, window seat and wardrobe; what type of wood to use for the window trim; and what type of wood to use for the underside of the soffit that is over the window seat. The intensity of the color tones (tints and shades) can suggest both cool or warm color camps.

I was thinking about having the same wood color (black- brown) & hanging the wall cabinets behind the table, but when I read your article I got confused about the black-brown color. If the dominant color in the wood appears to be red, then a green background will enhance and intensify the wood’s hue. Teak is infamous for this color change due to the extremely high oil and silica content (both extractives). Each type of wood has a characteristic color and grain pattern, and the color also can be altered with stain.

It would make sense that the pores in kitchen are more closed and not accepting the stain as well. The resulting damp environment below encourages rot that can take years off a mahogany deck’s life. And if his client ever commissions another piece in the future, its going to be incredibly easy for him to match the color. My students built many projects using Mahogany and I still have my Mahogany footstool Mr. Foslin required us to build.

Then I bought Ronseal Dark Oak woodstain from my local DIY store (he said the one for exterior wood will be more durable etc) and applied it on one flap. Don’t worry about all the wood pieces in a room matching – the casual, comfortable, gathered-over-time look of mixed woods is perfectly appropriate today. Sounds wonderful over our standard maple neck/alder body sides or optional genuine mahogany.mahogany color wood

Naturally, the stain you tinted the filler with will color your wood — the sanding will clear it up though. So when it comes to base colors, I just get as close as I can with the available colors in my collection (without going too dark). Purpleheart freshly milled has the distinctive purple color but changes to a brown color as the extractives react to air, heat, and light. The term fruitwood is also used to describe a light brown finish on other woods.

Folks have successfully put Gel Stain on more surfaces than we ever dreamed of including fiber glass but if you want to proceed, TEST your procedure on a hidden area first and let cure for 14 days. This is what makes wood so beautiful but also what makes us realize that getting a match in color sometimes is just about waiting for it to change on its own. The wood displays a prominent growth ring figure, with grain that is straight or interlocked. The soft sponge lets me get rid of the grain burrs without removing too much color.

With the information presented in this post, and a little bit of practice (thought) you will easily be able to know what you are looking at, and it will open your eyes to a whole new world of color exploration. Because of the way it growns, the heartwood of the walnut tree grows darker than the sapwood on the outer rings. So you could use this filler instead of the one I demonstrated that requires mixing with stain.

Be sure to plan just where you will finish (at a doorway) — we don’t want you boxed in a corner waiting for the floor to dry! We would nearly always recommend taking back to bare wood to re apply a new branded product as no company will gaurantee the use of another brands compatibility. They can be very absorbent, taking up the Resene Colorwood stain too quickly and making it hard to apply and achieve an even finish.

Even though oak can be stained almost any color, it will retain some of its natural color. The grades of the select lumber are: B and Better grade, which has minute or no blemishes; C Select grade which has some minor defects such as small knots; D select grade that has larger imperfections, which can be concealed by paint. We have had natural for 13 years and it is awesome to experience something different. European walnut is lighter in color and slightly finer in texture than American black walnut.